|
The baling press mod. D2OVA is suitable for the pressing of blends of loose agriculture products of different kinds.
|
Capacity tons |
Installed power kW |
N° bindings |
Bale weight kg |
Production
bales/h |
|
50-200 |
25-70 |
6-10 |
250-500 |
20 |
Our standard production foresees machines with capacity from 50 to 200 tons, with sizes and weight of the finished bale on specific request of every customer.
The machine is equipped with a special packaging system, which allows to wrap first the bale in nylon clothes and then to carry out the binding operation with polypropylene or polyester straps on the protection cloth.
By this way it is possible to limit very much the possibility of dust escape, both during the packaging of the bale and during the next operations of movement, storage and conveying.
STRUCTURE
The carpentry of the machine, manufactured by reinforced steel sheets having a strong thickness, is always oversized compared to the effective needs of pushing power, in order to guarantee a higher stability to the continuous mechanical stress.
The pressing case is defined by the pressing table, by the pushing table and by a sliding sluice, which, once the pressing cycle is finished, goes up to allow the removal of the bale.
PRESSING TABLE
Made up by sheets and high thickness steel profiles, it is completely coated on its sides with high density polyethylene plates and it is equipped with two driving poles to ensure stability and mechanical resistance during the pressing operations.
PUSHING TABLE
Made up by sheets and high thickness steel profiles, it is completely coated on its sides with high density polyethylene plates, to ensure stability during the removal of the bale from the machine.
BALE PACKAGING
The packaging system foresees the binding of the bale on the nylon film, which wraps it.
The automatic system allows to wrap completely the bale in nylon film.
The operations foresee the longitudinal welding of the nylon, the wrapping and the contemporary binding of the bale during the removal and the transversal welding for the closing of the packaging. The nylon rolls, to be used, which can be replaced once finished, can be found on the market commonly and the thickness can be chosen by every single customer.
HYDRAULIC STATION
It is positioned near on the machine and it is the most important part of the baling press; the execution speed of the finished bales, the strength developed by the machine, and a big part of the noise produced by the baling press as well as the reliability in the time of the good functioning depend on it.
Because of this reason Dabizzi & C. s.n.c. has chosen to use leader products such as Bosh Rexroth, Casappa and Denison, as guarantee of their construction quality and of the final customer.
The machine is loaded by a feeding conveyor equipped with shutter for the closing of the loading outlet during the pressing.
On request, the baling press can be equipped with electronic weighing pan, to state exactly the production.
To complete the plant there are the electric control board, which can be installed on the machine or in a remote position, and external perimeter protections, where necessary. |